Installation Notes for Contour Perfit Mouse Windows 9x Driver
(Release Date: 10/29/99)

Please note that you must remove any other aftermarket mouse drivers
before installing the Contour Drivers.  This includes all older Contour
mouse drivers as well.

To do this: 
- Click Start/Settings/Control Panel/Add Remove Programs

- Look for any reference to Microsoft Intellipoint, Logitech Mouseware,
  Toshiba Accupoint, or any other mouse driver software. If you see one,
  un-install it before running our SETUP program.

- You should also check your Mouse Control Panel to make sure you are 
  configured for a Microsoft PS2/Serial port mouse.

  - In Win95, go to the Control Panels, and load the Mouse control panel
    you should see 4 tab pages (Buttons, Pointers, Motion, and General) 
    Choose the General tab.If it does not Say "Microsoft PS2 port mouse", 
    choose Change and select "Show All Devices" and choose "Microsoft" 
    on the left ad "Microsoft Ps2 port mouse" on the right. Click OK, 
    and Close. Your system will restart. You can then proceed to 
    install the new driver.

  - In Win98, go the the System Control Panel, click on "Device Manager" 
    Look down the list for "Mouse", click on it to expand it. It should 
    say "Microsoft PS2 port mouse". If it does not, click on the Driver 
    tab, choose "Update Driver" and hit "Next" Then choose the option
    "Display a list of all drivers...". Choose "Show all Hardware" You 
    should then go the the Microsoft option and choose the "Microsoft 
    PS2 port mouse". Hit Next and follow the prompts. After the system 
    restarts you can go to the next step.


Run Setup from the "ContourSetup" Directory.

  - Select the device you are using (device on ps/2(serial) port)) then
    click next
  - Select the mouse you are using left or right handed contour mouse. 
    then click next
  - A new screen with 5 tabs shows up.  This is where you define your 
    mouse parameters.
  - Buttons is the Tab that is in front.  Double click speed is also on 
    this page.
  - Motion Tab will let you select cursor speed and acceleration.
  - Pointers Tab will let you select your pointer scheme.
  - Actions Tab is how you define your mouse's middle button or use the 
    chording feature of this driver.  To add a new action press assign.
    Select the button you wish to assign a new action to, select the 
    function you wish the button to perform, then click the assign action.
    It will bring you back to the main tabs page.  Click Apply.
  - If you select Swift Scroll for your middle button.  The Scrolling tab
    will let you see how the scroller works.
  - Clicking next will bring you to the Customize Applications Menu.  This 
    will let you setup application sensitivity.  It is similar to the actions
    tab, when you assign a function to an application the function will only
    operate in that particular application.
  - Clicking next will bring you to the About the Driver page and also will
    give you information on how to use two mice at the same time.
  - Clicking finish will end the driver install.

  - You can always access the driver from the Control Panel or the System 
    Tray next to the clock just double-click the Mouse icon and it will walk
    you through the steps above again.

10/08/99 - Initial Release
10/29/99 - Various Bug updates including memory leak problems when using a non-
	Standard mouse pointer scheme.

If you have any questions or problems you can call or email technical support
at support@contourdesign.com